|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuji
CP, IP & QP Feeder Storage Carts
|
|
 |
AGI's
model 206 cart is a flexible and modular design that efficiently stores
up to (111) 8-mm CP-6/7 feeders! The cart frame features mounting holes
on 2" centers that accommodates removable tooled feeder shelves for
all your CP, IP & QP series machines. The removable tooling is based
upon our robust, machined Aluminum plate, so it will last a lifetime. For
CP 6 or 7 feeders, you can position the feeder bar Flat or Incline or Decline
to best fit your needs. The cart also accommodates many of our Job Kitting
options.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To
order, simply specify the 206 frame and select which feeder tooling and
the quantity you need. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cart
Shown with
CP-6 Feeders |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FEATURES
and BENEFITS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Accommodates
up to 3 adjustable shelves for;
CP, IP, or QP series machines. Shelves bolt on 2" centers. |
|
|
Easy
feeder load/unload, slide in and out. |
|
|
Feeders
are completely enclosed within cart frame to prevent damage or banging. |
|
|
Machined
tooling from 3/8" Aluminum plate, hard anodized for long life. |
|
|
Feeders
supported per manufacturer's specifications. |
|
|
Rugged
1" Square box tube, welded steel construction for stability. |
|
|
Performa
cushion-ride conductive swivel casters 5” diameter, with locks. |
|
|
Baked
epoxy painted textured finish, Cream. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NO
ASSEMBLY REQUIRED |
|
|
|
|
|
|
|
|
 |
|
|
|
|
Close-up OF QP TOOLING
|
|
|
|
|
|
|
|
|
|
|
|
|
Cart
Shown with
QP Feeders |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Options
For Fuji Carts |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reel
Storage |
|
|
|
|
|
|
|
Benchtop
Setup Fixture |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FEEDER
TOOLING: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 206-FCP4 |
35
Slots for 8 or 12MM feeders on 1" centers with removable dividers.
Mounted at decline. |
|
| 206-FCP6/7 |
37
Slots for 8 or 12MM feeders on .938" centers. Machined Aluminum
hard anodized plate; can be mounted at incline, decline, or flat. |
|
| 206-FIP3/QP3 |
37
Slots for 8 or 12MM feeders on .938" centers. Machined Aluminum
hard anodized plate; must be mounted at decline. |
|
| 206-DH |
Document
Holder - 10" x 10" x 2" metal bin with "V"
notch, epoxy painted. |
|
|
| 206-RS |
Reel
Storage Shelf (Can Only Be Used with 2 Shelves). Accommodates 7”
- 15” diameter reels with removable wire dividers. |
|
| 206
FS |
Bench
Top Feeder Set Up Fixture - 12" x 7" x 12" tall, handles
2 feeders.
Specify CP 2-4, CP-6/7, or IP, or QP feeders. |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
