|
|||||||||||||||
|
Mailing address:
AGI Corporation 177 Nick Fitcheard Rd Huntsville, AL 35806 Tel No.: 256-858-3300 Fax: 256-858-3304
Date: Jan. 10th, 2008 Huntsville, Alabama, Jan. 10, 2008– Corporation, manufacturer of tooling products and service provider for circuit board assembly,introduces the PCB Tray Storage Cart. This cart is designed to protect printed circuit boards (PCB) of all sizes during transport and storage.
Date: June 21, 2006 _____________________________________________________ Huntsville, Alabama, June 21, 2006 – AGI Corporation, manufacturer of Wave Solder and SMT / Reflow Pallets, Wave Solder Profiling Tools and Feeder Storage Carts, announced today that it is producing titanium selective solder pallets for difficult wave soldering applications. These applications include PCB’s that are designed with plated through hole components in very close proximity to bottom side SMD’s. By machining titanium vs. composites we can achieve ‘seal walls’ down to .020 inches thick standard and as small as .015 inches thick over short distances. Other benefits include; no sagging during soldering and thinner floor thickness which reduces the “Z” height the solder must travel.
AGI Corp’s design is based upon machining a single piece of titanium to match the PCB and incorporate that into a composite pallet frame. By doing this, the pallet is lighter, cheaper to machine and by avoiding using small titanium inserts screwed to the pallet; we avoid the issues of leaking, alignment and thermal mismatch. The composite frame runs much cooler than the titanium coming out of the wave, so it is easier to handle or convey after soldering. The titanium pallet design includes many of the proven AGI designs for low defect wave soldering. According to general manager, Chad Petty, “AGI Corp is very excited about the introduction of this new product. This solution addresses the special needs of challenging applications. If you have any questions about what AGI Corp can do for you please feel free to contact us. Our manufacturing operations are now producing products for North America and Mexico, 7 days per week, allowing AGI to supply customers with quality products as quickly as possible.” For all your PCB Assembly needs, contact, Clarence Glaze, sales, cglaze@agicorp.com or visit AGI at: www.AGIcorp.com or call (256) 489-1409, Fax: (256) 858-3304. Date: June 13, 2006 _____________________________________________________ AGI Announces 10,000 th Order Received Huntsville, Alabama, June 13, 2006 – AGI Corporation, manufacturer of Wave Solder and SMT Assembly Pallets, Wave Solder Profiling Tools and Feeder Storage Carts, announced today that they have received their 10,000 th order for PCB Assembly tooling! It was produced today for Benchmark Electronics; the solder pallet was designated as a milestone achievement for AGI Corp. The Wave Solder Pallet was presented to Benchmark Electronics and their representatives on June 13 th of 2006. The presentation was made by Todd Gilmore and Chad Petty of AGI Corporation to Chris Snitko and Andy Floyd of Benchmark Electronics.
Pictured from left to right are; Andy Floyd - Benchmark Purchasing, Chad Petty - AGI Corp General Manager, Chris Snitko – Benchmark Mfg. Engineering Manager and Todd Gilmore - AGI Corp President AGI Corporation has been in business since 1994 supplying superior products and innovative designs for the PCB Assembly industry. AGI Corp is looking forward to 12 more years with the same service and attention to detail. Todd Gilmore indicated that “AGI Corp has enjoyed success by partnering with our customers. We will always go the extra mile for our customers. We enjoy the challenges of developing innovative solutions and delivering them on time with the highest quality. Our manufacturing operations are now producing products for North America and Mexico, 7 days per week, allowing us to supply our customers with product as quickly as possible. If you have any questions about what AGI Corp can do for you, please feel free to contact us.” For all your PCB Assembly needs, contact, Clarence Glaze, Sales, cglaze@agicorp.com or visit AGI at: www.AGIcorp.com or call (256) 489-1409, Fax: (256) 858-3304. Top of Page Date: April 3, 2006 _____________________________________________________ AGI Announces Major Manufacturing Plant Expansion Huntsville, Alabama, April 3, 2006 – AGI Corporation, manufacturer of Wave Solder and SMT / Reflow Pallets, Wave Solder Profiling Tools and Feeder Storage Carts, announced today that it has completed a 7,500 square foot expansion to it’s manufacturing facility. This expansion more than doubles its current manufacturing space. The expansion was needed to support AGI’s continued growing demand for its products and the shorter lead times their customers' require. In addition to the facility expansion, AGI has added (3) more CNC machining centers. The added machines, coupled with a nearly 24/7 manufacturing operation will help AGI keep pace with their rapidly expanding tooling needs. AGI has also increased its staff by 50% over the past few months. Huntsville, Alabama is well known for having a large pool of manufacturing and engineering talent in the Southern United States. According to general manager, Chad Petty, “The demand for our products and services increased at a much faster rate than anticipated. AGI has met that demand head on, by doubling our production capacity in 2005. We are now ready to add more blocks of capacity as needed to keep in step with the industry. Our manufacturing operations are now producing products for North America and Mexico, 7 days per week. We are approaching a 24 hour - 7 day work week, allowing AGI to supply customers with quality products as quickly as possible.” For all your PCB Assembly needs, contact, Clarence Glaze, sales, cglaze@agicorp.com or visit AGI at: www.AGIcorp.com or call (256) 489-1409, Fax: (256) 858-3304. Date: July 15, 2005 _____________________________________________________ AGI Announces New Wave Profiling Pallet Huntsville, Alabama, July 15, 2005 - AGI Corporation has been developing the perfect wave profiling and characterization tool for many years. Through this effort we have found that many customers need the temperature measurements and software analysis obtained by their profiling tools such as “KIC ®, ECD Mole ® and Data Paq ®” - specified with order. However, the need for a simple and visual device for quick reference is also required. AGI’s Wave profiling pallet allows you to measure the height of the Wave Nozzle! Pallet includes (2) wave nozzle height slides with inscribed height measurements. Until now, manufacturers had to purchase and maintain two or more wave profiling tools. AGI has combined them into one. It is fabricated from 8-mm thick, black, ESD composite material with a 1/8" thick AGI WAVE GLASS. The glass is laser etched with a 1/2" square grid pattern to allow accurate visual alignment and profile status of the wave. AGI's new wave glass does not require pre-heating! Standard Pallet widths of 16", 20" and 24" with custom sizes per request.
The pallet contains (6) .050" diameter holes accept T/C's for the data pack, (3) 1.9-mm diameter w/M3 hole tapped and c-bore for the Thermo Couple lug, (2) Aluminum measurement blocks, (2) stainless steel pin with brass bushing pointers to measure the solder pot height, (2) 23" long titanium fingers, plus (2) hinge bars and blocks for solder pot measurement tool. All positioning and reference markings and text filled with white ink for maximum visibility. AGI has been serving the needs of the PCB Assembly Industry since 1994. We have a fully automated CAD support group that can work directly with client supplied GERBER ® data to design a product that will perform to our client's expectations. Fabricating pallets for surface mount and through-hole assemblies, which are accurate and delivered on time, is paramount in providing on-going customer satisfaction. Our fabrication team is able to provide fast delivery while maintaining a product of high quality. The raw materials were selected to assure the longest life while maintaining specified tolerances and process conditions. This, coupled with a design philosophy that focuses on simplicity and robustness, ensures ease of use, which translates to longer life through less in-process damage. For all your PCB Assembly needs, contact, Clarence Glaze, sales, cglaze@agicorp.com or visit AGI at: www.AGIcorp.com or call (256) 489-1409, Fax: (256) 858-3304. |
||||||||||||||
 |
|
|
|||||||||||||
